Setup guide

Dedicated Micros ©2006
91
DS2 Network Guide
Watermarking
This option has already been covered in the Conguration section of this manual; please refer to
How to Enable and Congure Watermarking for details of this option.
System Variable
This page can be used for system diagnostics as it provides a readable overview of the conguration
parameters of the unit. Any information that has been congured and stored on the unit will be
shown on the le. Typical information is; camera titles, alarm title. It identies the Value, Variable
Name and the Description.
Note: This information may be useful when contacting Dedicated Micros for system analysis.
Reset
This will reset the unit. Remember to save all conguration settings before resetting the unit as
information not saved will be lost.