Setup guide
Dedicated Micros ©2006
89
DS2 Network Guide
Function Description
Comb Filter This feature improves image clarity and is turned on by default.
Some NTSC line locked cameras may give better image quality
results with the Comb Filter disabled.
Video Input This is a drop down list of the available video inputs on the unit.
Resolution This is a drop down list allowing selection of the resolution being
viewed/traced (high, medium and low).
Input Path This is a drop down list allowing selection between free use or
preselector 1 – 4.
V and H Position When a line of video is selected this identies the vertical and
horizontal position. For the overall image these values will be 0.
Show Trace This allows the R, G, B trace to be enabled or disabled.
RGB These are the calculated values for the RGB contents within the
whole image or the selected line.
Audio Trace
It is possible to use the audio trace option to identify if audio is being transmitted or received by the
unit.
To view the audio select the line in or line out buttons, the corresponding audio signal will be traced.
Function Description
Audio Line Out This will produce a trace of the audio out line on the unit. This is
represented by a red line.
Audio Line In This will produce a trace of the audio in line on the unit. This is
represented by a blue line.