Setup guide
Dedicated Micros ©2006
88
DS2 Network Guide
Function Description
Comb Filter Enabled The Comb Filter improves image clarity and is turned on by
default. Some NTSC line locked cameras may give better image
quality results with the Comb Filter disabled.
Local 4CIF Interlace Enabled This can be enabled if the system will be used to record using
4CIF settings, and will eliminate the comb effect that may be
visible in a high motion recording environment. It is not required if
not using 4CIF, and may only be required when recording a high
motion scene.
Camera This identies the video input number on the unit.
Title This identies the corresponding camera title allocated to the
video input.
Colour Select a value from the drop down list to select the colour level for
the video input.
Contrast Select a value from the drop down list to select the contrast level
for the video input.
Video Scope
The Video Scope page shows a trace of the video content (RGB) of the overall image. It will give the
RGB values of the selected image.
It is possible to select any of the video inputs on the unit to view the video contents. It is also
possible to select the resolution of the image and compare the RGB levels.
Clicking within the video image will select a line of video and identify the value for that line rather
than the overall image.