Setup guide

Dedicated Micros ©2006
82
DS2 Network Guide
7. Enter the update interval in seconds, this identies the time between updated les
being transmitted from the unit to the FTP Server. The speed and cost of the network
connection being used should be taken into account when setting this time period.
8. Enable the video input(s) that are to be made available for webcam functionality.
Images from these inputs will be transmitted to the FTP Server for integration into web
pages.
9. Save the conguration information by selecting Save Settings!
Note: For conguration via the OSD refer to Appendix G where all menu options are described.
Function Description
FTP Server This is the IP address, URL or Domain Name of the FTP Server.
Images will be uploaded from the unit to this FTP server as time
intervals specied.
FTP Root Drive/Directory This is the main/root directory on the FTP server where the image
directory will be located.
FTP Image Directory This directory will be created when the initial image is uploaded to
the FTP Server, it is the directory where all images will be saved
on the server.
Image Filename Prex This is an identier for images sent from this unit and will be
stored as a prex to the le name.
Username To gain access to the FTP server it is necessary to go through
an authentication process this is the username that will allow the
images from the unit to be uploaded to the FTP Server.
Password To gain access to the FTP server it is necessary to go through
an authentication process this is the password that will allow the
images from the unit to be uploaded to the FTP Server.
Update interval This is the minimum update interval between each image that is
transmitted from the unit.
Camera selection This allows you to enable the video inputs that will be accessible
for upload to the FTP Server.
To enable the webcam connection information:
1. Enable the single FTP session so the FTP link from the unit to the FTP server is
permanently up. If this is not enabled then an FTP session will need to be established
every time the unit needs to transmit images.