Setup guide
Dedicated Micros ©2006
79
DS2 Network Guide
192.168.3.1/26 255.255.255.192 0 - 63
192.168.3.1/27 255.255.255.224 0 – 31
192.168.3.1/28 255.255.255.240 0 – 15
192.168.3.1/29 255.255.255.248 0 – 7
192.168.3.1/30 255.255.255.252 0 – 3
192.168.3.1/31 255.255.255.254 0 - 1
How to Enable System Logs
There are numerous actions that the unit can be congured to automatically carry out on receipt of;
an alarm, VMD activation, Schedule function, etc. When these triggers are received and the actions
initiated then it is possible to log this information within the unit System Logs.
By default the unit will log illegal le access and telnet/FTP users, to enable the other functions:
1. Select Logs -> System Logs Set-up.
2. If connect/dial using PPP has been congured within the alarm and VMD pages
enabling this option will log all the PPP actions.
3. If the unit has been congured to transmit le to an FTP server enabling this function
will log all FTP transactions.
4. Save the conguration by selecting Save Settings!
Note: For conguration via the OSD refer to Appendix G where all menu options are described.
Function Description
Log PPP connections This enabled logging of WAN connections using the PPP ports
and records the IP address, the prole used and the local time of
the attempted connection.
Log anonymous FTP connections This identies when an unauthorised user tries to access the unit
by entering anonymous in the username or password.
Log illegal le access Any web access to a CGI protected directory or non-existent le
will be logged with an IP address, time and type of action.
Log Telnet/FTP users This will log users that are trying to gain access to the unit using
an FTP or telnet session.