Setup guide

Dedicated Micros ©2006
7
DS2 Network Guide
Section Feature Description
Home Register Note: Conguration and registration of the
unit is carried out at the factory, therefore this screen
is for fault diagnostics only and it is recommended
that the page is not enabled unless advised by
Dedicated Micros Technical Support.
Cameras IP Cameras This feature will enable IP Cameras.
Note: This feature is only available in software
version 4.5(001) and above
Text in image It is possible to integrate the unit into an application
where receipt of specic text can be used to trigger
an alarm. This will enable the conguration page to
be included in the Cameras tab.
Alarms Alarm image protection It is possible to congure the unit to protect images
within parameters set by the operator (time and
date, etc). This will enable the conguration page to
be included in the Alarms/VMD tab.
Database conguration The database can be set to have a maximum
number of entries to ensure efcient management
of the information. This will enable the conguration
page to be included in the Alarms/VMD tab.
Alarm/VMD reporting It is possible for the unit to send information to a
remote monitoring station under certain conditions
(camera fail, etc). This will enable the conguration
page to be included in the Alarms/VMD tab.
Advanced Alarm Features It is possible to enable advanced alarm features on
the unit. When enabled the advanced features are
added to the Alarm Setup pages with the Alarms/
VMD tab.
485 Expansion Bus The unit can support additional DM 485 devices
which are connected to the 485 Bus connector
on the unit. This option must be enabled for these
devices to be identied by the unit
Network Automatic FTP download The unit can be congured to automatically
download information using FTP, This will enable
the conguration page to be included in the Network
tab.
SMS reporting The unit can be congured to send data to an SMS
server This will enable the conguration page to be
included in the Network tab.
E-mail reporting The unit supports e-mail of data under certain
conditions (alarm, start up, etc). This will enable the
conguration page to be included in the Network
tab.
Webcam support The unit can make any of the video inputs available
to a web server for use within a web page. This
function uses FTP to upload the images to the web
server. This will enable the conguration page to be
included in the Network tab.
Firewall conguration The unit supports an on board rewall to ensure no
unauthorised users can access the unit. This will
enable the conguration page to be included in the
Network tab.
Tools
Scope, Audio Trace, Relays, Variables There are a number of tools that can be used to
obtain information on the system performance,
enabling this options will display the relevant pages
in the Tools tab.