Setup guide

Dedicated Micros ©2006
60
DS2 Network Guide
8. It is possible to enable an FTP download and more regular intervals by enabling the
polled option, once enabled identify the time period between the end of one FTP
download to the start of the next.
9. If the FTP download is only to be initiated by the Operator then enable the manual
download option. The FTP download will only commence when the Start Download
button is selected.
10. To automatically remove the image protection from les that are downloaded then
enable the clear video protection after download option. If this is not enabled the
images would require un-protecting manually via the Alarm Image Protect/Un-Protect
page.
11. It is possible to allocate a watermark for each video partition; this watermark information
is logged in the log le. Enable this function by selecting watermark each partition
download option.
12. The server directory is a xed directory structure, all FTP downloads will be saved
in the directory name you have identied under this main directory. This a read only
section.
13. Remember to save the conguration by selecting Save Settings!
Function Description
FTP Server This is the IP address, URL or name of the FTP server the unit will
connect to for FTP download of images.
FTP Control Port The default port for FTP is port 21, if this port has already been
allocated on the network it is possible to identify and alternative
port number.
FTP Root Drive/Directory This is the directory where the images are to be stored, it is
recommended that a name associated with the unit name be used
for ease of retrieval.