Setup guide
Dedicated Micros ©2006
6
DS2 Network Guide
Language The unit web conguration pages can be displayed in the
language that is most suitable to the country of installation. The
currently languages supported include; English, Spanish, French,
Czech, Italian, Russian, Dutch, Portuguese, German, Turkish,
Croatian, Danish, Finnish, Norwegian, Hungarian, Swedish,
Polish, Arabic, Chinese
DST (Daylight Saving Time) This reects the local time zone for the area where the unit is
installed.
Reset This will reset the unit.
Sync Unit time from PC The unit can be synchronised with the PC that is being used to
congure the unit. If the PC is synchronised with the network clock
then this time will be reected in the unit. The synchronisation is
not persistent and will only synchronise the unit and the PC at the
time the button is pressed.
How to Enable System Features
There are a number of features supported on the unit that can be enabled or disabled depending on
your system requirements.
When these features are enabled, the relevant conguration web pages will be displayed; if these
are disabled then these pages will be omitted.
To enable the System features
1. Select the System -> Advanced Features.
2. By default the Live options are enabled, to enable the other features tick the box next to
the feature.
3. Remember to select Save Settings!
4. You will now need to select Reload Webpages for the relevant conguration pages for
the enabled features to be displayed.
5. Some of the features require a system reset select the Reset button to reset the unit
and re-load the web pages.