Setup guide
Dedicated Micros ©2006
50
DS2 Network Guide
1. Click on Start-> Control panel -> Network Connections
2. Select ‘Create a new Connection’.
3. On the pop up window that appears, click ‘NEXT’
4. Select ‘SETUP AN ADVANCED CONNECTION’ and click ‘NEXT’
5. Select ‘ACCEPT INCOMING CONNECTIONS’ and click ‘NEXT’
6. Select the TA or modem you have installed on your PC and click ‘NEXT’
7. Select ‘DO NOT ALLOW VIRTUAL PRIVATE CONNECTIONS’ and click ‘NEXT’
8. On the User Permissions screen, click ‘ADD’
9. Enter the username, full name, password and then type the password again.
Using the example setup, enter the following:
Username = dialout
Full name = dialout
Password = secret
Conrm Password = secret