Setup guide

DS2 Network Guide

Simple Conguration

How to Congure Global Parameters

There are some parameters that can be set that will affect the overall system; video standard for the

video inputs, browser format for the web interface, language that the menus will be displayed in and

the DST (daylight saving time) settings.

To congure global parameters:

1. Select Home -> Main Set-up.

2. Select the video standard from the drop down list; this will be the standard for all the

video inputs on the unit.

Note: It is necessary to carry out a system reset if the video format is changed before saving the

settings. This allows the unit to activate the change.

3. Select the date format from the drop down list.

4. The unit web pages can be viewed in two formats; ActiveX (default) or Java, select the

relevant option from the drop down list.

5. The web conguration pages for the unit can be displayed in a selection of languages,

select the language which is most appropriate to your installation from the drop down

list.

Note: Ensure the PC being used for the conguration is set to the correct time zone and that DST

is enabled before continuing.

6. Select the DST for region where the unit is installed from the drop down list.

7. If the settings are incorrect reset the unit by selecting the reset button.

8. If the unit time is to be synchronised to the PC that is being used to congure the

system then select sync unit time from PC. Note this only synchronises the time when

the button is selected this will not maintain synchronisation permanently.

9. Remember to save the conguration by selecting Save Settings!

Function Description

Video Standard This displays the setting for all the video inputs on the unit.

Date Format It is possible to identify the format in which the date will be

displayed; the default setting is Day Day, Month Month, Year Year.

Browser Settings The browser interface on the unit supports Active X or Java, select

the most appropriate for the application from the drop down list. All

users connecting to the system will be presented with the selected

interface.