Setup guide
Dedicated Micros ©2006
31
DS2 Network Guide
Archive Event This will mark the VMD event for automatic download to the FTP
Server identied or to the Archive list.
Email Image This will automatically e-mail a snapshot of the VMD incident to
the SMTP server identied, refer to Email conguration page for
more information.
Email Image Resolution This is a system setting, the selected resolution will affect any
option where snapshot images are possible, i.e. alarms, VMD,
etc. The setting identies the resolution of the image that will be
attached to the e-mail as a result of an event.
To set up each camera with a VMD grid:
8. In the Alarms/VMD -> VMD web page click on Click here to VMD applet option to
display the video image and VMD grid, by default video input 1 will be displayed and
the grid is divided into 16 zones.
9. Select the video input you are conguring from the drop down menu.
10. Select zone you are conguring from the drop down box.
Note: Any conguration carried out at this stage is for the selected video input and zone, you will
need to save the settings and then select another zone to congure the whole area.
11. Alternatively if the default zones are not positioned over the areas you intend assign for
detecting motion detection there is an option to clear all cells, you will be presented with
a prompt to check you want the cells deleting, select Yes.
12. To set a zone click at the edge of the area where you want to place the zone, move
to the opposite corner where the zone will sit and click again, a zone area will be
displayed over the area.