Setup guide
Dedicated Micros ©2006
22
DS2 Network Guide
Using the Prole Wizard
It is possible to set the unit recording conguration based on the users priorities. Using the
Conguration wizard, the Administrator can set the unit conguration according to the users
priorities.
To use the Camera Prole Wizard:
3. Select Cameras -> Prole Wizard.
4. Input the number of days that images should be stored by the system before being
overwritten. This will inuence the quality and rate of images being stored.
5. Use the selector button to determine if the images are to be stored as MPEG or JPEG.
4. Estimate the number of events that will be recorded during an hour in standard
recording mode.
Note: Ensure cameras have been selected for prole recording as detailed above.
6. Input an estimate of the number of events that will be recorded during an hour in
standard recording mode.
7. Use the drop down boxes under the individual camera entry to input the quality of
image and the recording rate required.
Note: Any of the settings that are outside the parameters of the unit will be highlighted in red.
Change to a lower setting until the highlighted eld returns to white.
8. For ease of installation, settings can be copied from other congured cameras, using
the drop down menu. Alternatively, individual settings can be added for each camera by
selecting User Dened from the drop down list and using the process described above.