Setup guide

Dedicated Micros ©2006
123
DS2 Network Guide
Single FTP Session Enabling Single FTP Session will result in avoiding the need
to carry out the login/logout process for each image that is
transmitted to the FTP Server, the unit will remain connected and
logged in to the ISP until the connection is manually disabled.
Webcam Resolution Identify the resolution of the images, dened in the Camera and
Record Setup menu, that are to be transferred to the FTP Server.
Webcam Enabled This gives access to a sub menu for when the webcam is
enabled.
Select Cameras Cameras can be individually selected to be part of the webcam
functionality. Press the corresponding camera key to enable
/ disable the camera. If all cameras are to be included in the
function, select the All Cameras option.
UPLOAD SETTINGS
This is a submenu of Web Cam Settings.
15 char
15 char
15 char
15 char
15 char
000 - 999 sec
Upload
S
ettin
g
s
FTP Server
FTP root drive/directory
FTP image directory
Image filename prefix
Username
Password
Update intervals
<None>
<None>
<None>
<None>
<None>
Edit
010 secs
Note: It is recommended that a name associated with the unit name be used for ease of retrieval.
Function Description
FTP Server This identies the IP address (or name) of the FTP server that will
receive the images from the unit.
FTP Root Drive / Directory Identify the directory where the downloaded images are to be
stored, this settings can accommodate 15 characters.
Note: The Password can be obtained from the Network Administrator.
FTP Image Directory This directory will be created when the initial image is uploaded to
the FTP Server, it is the directory where all images will be saved
on the server.
Enter the name of the directory to be created, it is recommended
that a name associated with the unit for ease or retrieval.
Image Filename Prex This is an identier for images sent from this unit and will be
stored as a prex to the le name.
Username and Password To gain access to the FTP server it is necessary to go through an
authentication process this is the username and password that will
allow the images from the unit to be uploaded to the FTP Server.
Note: It is important to take into account the speed of the route the FTP images will take
when conguring the update interval, i.e. the lower the update interval the more images
transmitted which will result in higher quantities of data being sent.
Update Interval This is the minimum update interval between each images being
transmitted from the unit to the FTP Server.
WEBCAM ACTIVATION
This identies when the webcam function is enabled on the unit