Setup guide

Dedicated Micros ©2006
121
DS2 Network Guide
SMS Server It is possible to enable the unit to become an SMS Server to
receive and log SMS message, highlight the option and press to
switch between enabled / disabled.
Report Settings An SMS message can be automatically transmitted when the unit
identies specic events.
Callback Prole 0 This identies the route the return message, from the Operator
mobile device, will take. The return message must contain the
SMS command password, callback IP address (IP address of
the remote PC with the Viewing application) and the command to
action the unit to automatically call the remote station.
Callback Prole 1 This allows an alternative prole to be congured to work as
a back-up or alternative route for the return message from the
Operators mobile device.
The options are to congure the setting use the cursor keys
to scroll through the available options or the default settings is
Ethernet.
SMS Command Password This is the password to enable the SMS commands to be initiated
and transmitted from the unit to the mobile device.
This password will be included in the return text from the
Operator.
Use the cursor keys to scroll through the available characters.
When the password had been congured highlight OK and press
the MENU key to return to the SMS Setting menu.
Advanced Settings These settings are specic to the GSM module connected to the
unit.
REPORT SETTINGS
This is a submenu of SMS Settings.
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Report
S
ettin
g
s
Report startup
Report alarms
Report camera fail
Report VMD activation
Verbose messages
Disabled
Disabled
Disabled
Disabled
Disabled
Note: This format is not supported in standard SMS Servers
Function Description
Report startup If for any reason the unit is reset an SMS message will be sent.
Report alarms The unit will send a message on receipt of an alarm.
Report camera fail If the unit detects any of the video inputs has dropped below the 1
volt pk-to-pk an SMS message will be sent.
Report VMD activation If any of the inputs on the unit triggers VMD an SMS message will
be transmitted.
Verbose Message The verbose message option ensures that any text messages
transmitted from the unit is in a readable format to the mobile
device.
ADVANCED SETTINGS
This is a submenu of SMS Settings.