Operating Instructions and Installation Instructions
AD Holdings ©2011
97
TransVu Express
Live Transmissions
The unit transmits live images using JPEG or MPEG formats.
The NetVu Connected remote viewing software will use the settings congured on this page as the
defaults for JPEG & MPEG; High, Medium and Low settings.
High LAN/Medium WAN/Low VLBR
This shows the transmission settings congured for a High quality
LAN (Local Area Network) connection, Medium quality WAN (Wide
Area Network) connection or a Low quality VLBR (Very Low Bit Rate
connection).
Comp Settings can be established for JPEG and MPEG compression
.
Res
For MPEG and JPEG transmission, select image resolution settings
(4CIF, 2CIF, CIF or QCIF).
Size/Rate (kbytes/kbits) For JPEG, the gure entered will be the size of the JPEG transmitted
(in Kbytes). For MPEG4 the gure will be the bit rate allocated. A
higher rate will provide better quality picture display. JPEG le sizes
can be congured in the range of 5-45Kbytes and MPEG bit rates in
the range of 45-2500Kbits/second.
PPS This shows the number of pictures transmitted per second.
For JPEG,
the actual images transmitted will depend on the bandwith of the
link, increasing the pictures sent per millisecond may introduce time
lag if bandwith is not sufcient. On MPEG transmission, increasing
the pictures sent will also reduce the quality of the images (as more
images are transmitted for the dened bit rate).