Operating Instructions and Installation Instructions
AD Holdings ©2011
95
TransVu Express
Network
This menu allows additional network settings to be congured if required.
Server Name This eld can be edited to allocate a name to the unit. This would
be used if accessing the unit via a Domain Name Server (DNS).
IP Address This is the IP address allocated to the unit.
Sub Net This is the subnet of the network were the unit is located.
Gateway This is the IP address of the default gateway (router).
Primary DNS This is the primary DNS server IP address for applications utilising
domain names.
DHCP If DHCP is being utilised, the assigned IP address will be
displayed here.
Note: If no IP address is manually congured, DHCP will automatically assign one. The unit
interrogates the network for a DHCP server, which assigns an available IP address. This
IP address can change every time the unit is powered up. If DNS is not available, it is
recommended that DHCP be disabled by entering a suitable, free, static IP address.
Tip: Use DHCP to locate a free IP address, then x the unit IP address
to the free one by entering the details into the IP address, subnet
and gateway elds.
Max Transmission Rate kbits/sec Shows the maximum transmission speed for the network type.
Tx Image Buffers This is used in order to improve the picture delivery over Ethernet
when using a slow connection i.e. 256Kbps. A buffer setting of 1,2 or 3
is available.