Operating Instructions and Installation Instructions
AD Holdings ©2011
93
TransVu Express
Global Actions
This menu details how to congure the default relay actions supported on the unit.
The unit supports one onboard relay connect
ion and global relay settings. These global relays can
be trigge
red under specic conditions i.e. selecting VMD/Activity will close the selected module on
receipt of any alarm or any notication of Activity
Detection from any camera
.
Image Protection Period Select a time period (in days) that images associated with an alarm will
be protected from deletion.
Alarm Display Mode Enable this setting to display an alarm text alert in the colour specied
in ‘Alarm Colour’ in the Zone Actions Menu.
Normally Alllows the normal state of the Contact to be congured.
On This option will enable detection of the condition listed on the left ie.
if the checkbox next to ‘VMD/Activity’ is selected, the VMD/Activity
condition will be monitored; options are Zone, VMD/Activity, Camera
Fail, System Set, Dial Out, System Override, Camera Masked, Is
Recording and Not Recording.
Status (Green) Opens the System Settings->Status->Unit Status page.
Alarm In (Yellow) Opens the Alarm Settings->Alarm Input->Alarm Input Conguration
page.
Zone Act (Blue) Opens the Alarm Settings->Zone Actions->Zone Action Conguration
page.
Refresh (Purple) Refreshes the current page