Operating Instructions and Installation Instructions

TransVu Express

VMD Conguration

The unit supports VMD (Video Motion Detection) on all video inputs and allows cameras to

automatically detect if there is any movement/changes within the video scene.

Note: Video Motion Detection enables a greater degree of control over detection settings and

conguration than the Activity Setup function. Each of the 16 VMD Zones can be directly

sized and congured to suit specic requirements. VMD can only be accessed and

congured remotely via the webpages.

If the camera are congured to detect Activity,the following warning will be displayed. Use the Alarm

Settings-> VMD/ACT Response menu option to congure ‘Detection type’ for VMD.

Once Activity is congured, this page will be displayed

Camera This is a drop down list of the video inputs on the unit, selecting one

of the inputs will display the corresponding video source. Ensure this

corresponds with the selected Channel.

Zone There are 16 VMD zones within the image that can be individually

congured, select the zone from the drop down list.