Operating Instructions and Installation Instructions

TransVu Express

Edit Action Select ‘Invert’ to change the current grid state i.e. Clear to Set. Select

‘Clear’ to remove grids or select ‘Set’ to add grids.

Activity Sensitivity This option allows the sensitivity setting to be established for the

activity grid being congured. There are ve settings to choose from:

Indoor High, Indoor Low, Outdoor High, Outdoor Low,

Very Low.

Grid Editor Use the Grid Editor by placing cells in areas of the camera view where

movement will trigger an alarm. To enter cells navigate across the

image via the Directional buttons of the I.R Remote Control). If viewing

on a local monitor place a cell by pressing the OK button. If viewing via

the webpages, use the mouse to navigate across the image, use the

left mouse button to

place a cell.

Reload Img (Red) This option will update the still image displayed in the Grid Editor.

Set All (Green) This option will insert a default square of 16 x 16 cells across the

displayed video image.

Clear All (Yellow) This option will clear all entered cells.