Operating Instructions and Installation Instructions

TransVu Express

Activity Setup

The unit supports Activity Detection on all video inputs. It enables cameras to automatically detect

any movement/changes within the video scene; this can trigger a number of operations such as FTP

alarm notication and an increase in recording rate.

A still image of the selected camera will be shown in the Grid Editor screen. To establish an Activity

zone, edit the cells that are displayed across the image.

This option should be used in conjunction with the Zone Inputs and Zone Actions menus.

If the camera is congured to detect VMD, the following warning will be displayed. Use the Alarm

Settings-> VMD/ACT Response menu option to congure ‘Detection type’ for Activity.

Once Activity is congured, this page will be displayed

Global Activity Mode Three options are available for Activity activation (specically in

relation to a PTZ camera).

Selecting ‘Active while at Preset 1’ will result in Activity mode

functioning only when the camera is at preset position 1. Select ‘Active

while camera not in motion’ for Activity mode to function only when the

camera is still. Select ‘Always Active’ for Activity mode to be in constant

operation.

Activity Channel This is a drop down list of the video inputs on the unit, selecting an

input will display images from the corresponding video source.