Operating Instructions and Installation Instructions

TransVu Express

Alarm Reporting This must be enabled for the unit to automatically connect on alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on this

camera channel.

Add Still Image This will record a still image of the trigger along with the standard

recording. This can then be sent on to an external destination.

Protect Alarm Images Select to automatically protect alarm images from being overwritten.

Alarm Relay Select to trigger an alarm relay following zone activation. Select the

specic relay via the ‘Relay’ option.

Email Image The unit can send an email when an alarm is detected, refer to

‘Network Settings->E-mail’ for more information.

Enable in Unset This will enable Activity Detection when the unit is in Unset operation

mode.

Enable in Set This will enable Activity Detection when the unit is in Set operation

mode.

Enable in Override This will enable Activity Detection when the unit is in Override

operation mode.

Note: Unset, Set and Override modes can be given more recognisable titles i.e. Day, Night,

Weekend via the Schedule menu (Record Settings->Schedule).