Operating Instructions and Installation Instructions

TransVu Express

Nuisance This is a repetitive detector value. When an alarm is received on the

unit, it will store the alarm time and monitor the number of times the

same detector is triggered within an hour period. If the detector is

triggered the number of times entered here, the unit will de-activate

this detector from triggering an alarm for an hour. The unit will continue

to monitor the detector and check how many times it is triggered during

this period. If it is again triggered more than the amount set in the

nuisance counter, it will remain de-activated for another hour. This will

continue until the trigger value falls below the nuisance count setting.

To disable this feature, leave the setting as ‘0’.

Stuck Time (min) If any of the alarms/detectors are active for a period longer than

specied here, they will automatically be omitted. This time period is

set in minutes.

Reset (Red) This button will restart the unit.

Relays (Green) Opens the Alarm Settings -> Global Actions page

Status (Yellow) Opens the System Settings -> Status -> Alarm Status Page

Zone In (Blue) Opens the Zone Inputs page (below).

Refresh (Purple) Refreshes the current page.