Operating Instructions and Installation Instructions

TransVu Express

RVRC

This menu allows a user to temporarily switch the unit’s system state into set/unset/override mode.

The user will be required to enter their name and also the intended override duration. The action

will be logged, refer to the Schedule menu for details of how to congure Set, Unset and Override

modes: Record Settings->Schedule.

Current System Time The unit’s current date and time information will be displayed. This will

be logged with any override action.

System GMT offset in mins; Displays the difference between the local time and GMT.

Current Timezone Displays the currently congured timezone, set on System Settings ->

Time and Date.

Current PC Time The current date and time information of the PC currently being used

to view the webpages will be displayed. This will be logged with any

override action.

PC GMT offset in mins:

Displays the difference between the time on the connected PC and GMT.

Current system state The current system state will be displayed i.e. Set, Unset or Override.

Note: The system state names displayed here will depend on those entered via the Schedule

menu:Record Settings->Schedule.

Override duration (minutes) Enter a time period for the override procedure. After this time period,

the system state will return to that congured via the Schedule menu

(for the current time).

Enter Your Name Enter your recognised user name. This will be logged.

Note: These descriptions utilise the standard name settings for the proles (SET, UNSET). If

these names have been changed on the ‘Schedule’ page, these menu options will display

the user congured names.