Operating Instructions and Installation Instructions
AD Holdings ©2011
58
TransVu Express
When ‘Simple Stream’ and ‘Recode Stream’ are selected via ‘IP Mode’, the following options will
be available:
URL Enter the URL address of the image source.
Port If required, edit the port input data. This will default to 80 (HTTP).
Chan If required, edit the channel input data.
PPS Edit the PPS (Pictures per Second) recording settings.
Recode Select to activate the recode option.
When ‘Remote Codec’ is selected via ‘IP Mode’, the following options will be available:
IP Address Enter the URL address of the image source.
Channel If required, edit the channel input data.
IP Camera (Yellow) Select to open the Camera->IP Stream Inputs page.
Camera (Blue) Select to open the Serial->Camera page.
Refresh (Purple) Refreshes the information on the current page.
If no video sources have been congured as IP on the Camera -> Camera Setup page, or if the
connection has been lost, the system will display the Connection page.
Channel Details the connection congured as an IP Stream.
Mode Details the encoding congured for the selected Channel.
Retry Connect Interrogates the Channel to re-aquire the IP Stream
View Prole Opens the Record Settings -> Prole Record page for the selected
Channel.