Operating Instructions and Installation Instructions
AD Holdings ©2011
57
TransVu Express
IP Camera Conguration
Channel Select a camera channel for review and adjustment. Only those
cameras designated as ‘IP’ in the Camera Setup menu will be
available, (Camera->Setup).
Mode Select the IP mode used to receive incoming IP data. Select from:
Simple Stream Received IP streams are non-compressed and are
viewed as congured on the originating source.
Recode Stream When selected, the unit will recompress the
incoming IP stream to the record prole settings
established for this camera channel in the Prole
Record menu (Record Settings->Prole Record).
This feature is only accessible with 3rd party IP
camera when the 3rd party IP camera license has
been enabled.
Remote codec When selected, the unit will utilise the codec in the
remote NetVu connected video server/camera as if
it was directly connected inside the DVR. Thus the
user can change Multimode proles and perform
additional activities such as VMD and Activity
Detection as if the codec was an integral part of the
DVR. If ‘Remote codec’ is selected, the loading on
the unit’s internal codecs will be reduced.
IMPORTANT: The Remote codec option is only applicable for NetVu Connected cameras.
Note: Additional IP cameras ( further to existing local camera channels) are remote codec only.
Therefore any NetVu connected cameras will be applied above local camera level.