Operating Instructions and Installation Instructions

AD Holdings ©2011
56
TransVu Express
IP Stream Inputs
The IP Streams menu allows the selection of High, Medium and Low resolution settings for video
sources originating from a network based source i.e. IP Camera or another Server. These streams
are congured on the remote device. This feature is predominately intended for use with 3rd party IP
camera streams (connected via the 3rd party IP camera unlock feature).
Note: The IP Stream needs to be set to Simple Streaming on Camera->Setup.
Note: There is only normal ‘non event’ recording for connected IP cameras.
Channel Select a camera channel for review and adjustment. Only those
cameras designated as ‘IP’ in the Camera Setup menu will be
available (Camera Settings->Camera Setup).
Copy to all Select this option to apply current settings to all
connected cameras.
The following options can be congured for Set, Unset and Override record proles when operating
under Normal (non Event) conditions. For information regarding record modes, refer to Conguration
Menu:Record Settings->Prole Record.
Comp Select image compression format (MPEG or JPEG).
Res For both MPEG and JPEG recording, select either High, Medium or
Low quality resolution settings.
Note: To view a local third party IP camera ‘live’, IP recording should be set to MPEG.
IP Camera (Yellow) Select to open the IP Camera Conguration menu.
Schedule (Blue) Select to open the Schedule->Setup page
Refresh (Purple) Refreshes the information on the current page.