Operating Instructions and Installation Instructions

TransVu Express

Nuisance Count

This menu allows the cameras to be ignored if they persistently send false alarm signals.

Camera Nuisance Count This is a repetitive detector value. When a camera failure alarm

is received on the unit, it will store the alarm time and monitor the

number of times the same alarm is triggered within an hour period. If

the detector is triggered the number of times entered here, the unit will

set the camera to ‘No Connection’. To disable this feature, leave the

setting as ‘0’.

Title Titles assigned to each camera are displayed.

Mode The settings will default to ‘Colour’. If Monochrome cameras

are used, select ‘Mono’. Selecting ‘Mono’ will remove colour

patterning. If a particular channel is not in use or the camera

has failed, select ‘Not Connected’.

Fail Rep Select this option to activate a Failure report in the event of

camera connection failure (video loss).

Cam Setup (Red) Select to open the Camera->Setup page

Serial (Blue) Select to open the System->Serial page

Refresh (Purple) Refreshes the information on the current page.