Operating Instructions and Installation Instructions

AD Holdings ©2011
50
TransVu Express
IMPORTANT: The menu options displayed will differ depending on the camera ‘Type’
selected here.
Fail Rep Select this option to generate a Failure report in the event of camera
connection failure.
Telemetry If a telemetry capable camera is connected, the appropriate
control protocol should be selected from the accompanying drop
down list, refer to ‘Appendix G’ for details of supported
telemetry protocols. This will also enable the telemetry controls for
pan, tilt and zoom.
Default to preset If a telemetry camera has been assigned a preset position, select
the chosen preset position here. Enter the time period (in minutes) of
inactivity which will result in the camera moving to its preset position,
For guidance on assigning camera presets refer to Viewer menus-
>Program Page.
after X mins Refer to ‘Default to preset’.
Note: The following settings will change depending on the type of camera connected.
If a Local Analog Camera is selected
Colour Select a colour value from -8 to +8 via the slidebar or enter a number
directly into the accompanying textbox.
Brightness Select a contrast value from -8 to +8 via the slidebar or enter a number
directly into the accompanying textbox.