Operating Instructions and Installation Instructions

TransVu Express

Camera Setup

This menu allows the conguration of active camera channels.

IMPORTANT: The menu options displayed will differ depending on the camera ‘Type’ and ‘IP

Mode’ selected.

Note: Ideally any setup options available locally on the camera should rst be used to best obtain

a suitable image quality.

Mono/Colour Camera

Load Video Window (grey) Press to initiate the applet to display the camera view.

Camera Select a camera channel for review and adjustment.

Camera Nuisance Count This is a repetitive detector value. When a camera failure alarm

is received on the unit, it will store the alarm time and monitor the

number of times the same alarm is triggered within an hour period. If

the detector is triggered the number of times entered here, the unit will

set the camera to ‘No Connection’. To disable this feature, leave the

setting as ‘0’.

Title Assign a recognisable name to the camera. This will be displayed in

all references to the camera in the both the Conguration and Viewer

menus.

Type The settings will default to ‘Colour’. If Monochrome cameras are used,

select ‘Mono’. Selecting ‘Mono’ will remove colour patterning. Select’

‘IP’ for an IP Camera. If a particular channel is not in use or the camera

has failed, select ‘No Conn’.