Operating Instructions and Installation Instructions

TransVu Express

Note: The hotspot can also be positioned by clicking directly on the map.

Hotspot Origin (deg) This option should be used when the hotspot relates to a Dedicated

Micros Oracle Dome camera. Clicking the hotspot will send the

Oracle Dome camera to a pre-determined view (absolute positioning).

However if the dead centre of the hotspot is selected, the camera will

be viewed from its current location.

The absolute positioning point will depend on the data entered here.

A setting of ‘0’ would result in the camera facing its Original (base)

position. To change the preset position, enter a number between 1 and

360. A setting of 20 would set the preset position to 20 degrees to the

right of its ‘origin’ position, 180 would send it to face in the opposite

direction (of its base position) . Refer to the ‘Viewer Menus-Program

menu‘ for information on establishing an Origin position for a PTZ

camera.