Operating Instructions and Installation Instructions

TransVu Express

Select from:

PAL Default

PAL Reduced

Note: It will be necessary to reboot the unit to implement any change to the Video Output Mode.

The unit can be rebooted via the Reset (Red) option.

Decoder Mode Select from Normal Display or Decoder Mode. Normal Display allows

cameras to be accessed and controlled via the Viewer menu. In

Decoder Mode, connected cameras can be accessed, viewed or

controlled via Dedicated Micros Pick-a-Point system.

Note: For further information regarding Dedicated Micros Pick-a-Point system, please contact

Dedicated Micros customer services in your region.

Mouse Sensitivity The sensitivity settings of the USB mouse can be adjusted from

the least sensitive (1) to the most sensitive (10). The setting can

be adjusted via the slidebar or a number entered directly into the

accompanying textbox. The default setting is 4.

Applet Location The location of the unit’s Viewer menu applet is displayed. The default

location will always be the applet installed on the unit. If accessing

multiple units via a remote connection, all can be assigned the same

Viewer applet. This will lessen the load time required when accessing

different DVRs/Servers.

For example, if a local unit and a remote DVR are to be accessed, it is

possible to set the Applet location for both DVRs as the local unit.

If viewing the unit remotely, Dedicated Micros provide a remote

applet. This remote applet can be selected via the ‘Set Location’ option.

The applet is located on the website (www.dedicatedmicros.com/software_

release/index_rmware.php). Due to possible bandwith restrictions on the

network the DVR is located, using this remote applet may improve data

transfer speeds.

Set Location Select the applet location. Choose from ‘Default location’ i.e. the applet

installed on the unit; or the ‘website’ option i.e. the

remote applet.

Reset (Red) Select to reset the unit and implement any changes made to the ‘Video

Output mode’ or ‘Applet Location’ elds.