Operating Instructions and Installation Instructions
AD Holdings ©2011
40
TransVu Express
Viewer Defaults
This menu allows conguration of settings for the Viewer function, refer to ‘Operating The Viewer’ for
more information regarding this feature
Default settings can be congured for accessing the Viewer function via a local monitor and also
remotely via a network connection.
Default Image Format Images sent to remote viewers will all be sent in either MPEG, JPEG
or with no Default..
Default Full Req Images displayed full screen in the Viewer menus can be shown in
either High Medium or Low resolution.
Default Quad Req Images displayed in Quad format in the Viewer menus can be
displayed in either High Medium or Low resolution.
Default Multi Req Images displayed in Multi format in the Viewer menus can be displayed
in either High Medium or Low resolution.
Default Multi Display When accessing the Viewer function, select the display format which
will initially be displayed.
Startup Multi Display When accessing the Viewer function, select the display format which
will initially be displayed.
Startup Camera When accessing the Viewer function, select the camera image which
will initially be displayed. If one of the multi display formats has been
selected via the ‘Startup Multi Display’ option, the camera channel
selected here will be displayed in rst (top left) position. Subsequent
camera channels will be displayed in sequential order.
Video Output mode Select the display output that best suits the viewing monitor. Typically
PAL Default is most suited for a CRT monitor, PAL Reduced for a TFT
monitor.