Operating Instructions and Installation Instructions

TransVu Express

Utilising USB Memory

1. Navigate to System -> Video Storage.

The Video Storage Allocation table displays drives that are available for video recording. Entries with the prex ‘/

HDD0’ indicate the units local hard drive (if installed), entries prexed by ‘/udd0’ are recordable media connected

to the unit via USB sockets, an entry prexed by ‘/mdd’ is the installed SD card.

1. Plug a USB storage device into one of the available USB

ports and click the purple Refresh button. The newly

connected device will be displayed with a ‘/udd’ prex. The

SD card (if installed) will also be displayed and can be

allocated in the same way. USB devices will be prexed udd,

SD cards will be prexed MDD.

2. The device may require formatting. DM recommends the

device is formatted even if it was previously been used as

video storage. Click on the ‘Format’ button adjacent to the

device listing to prepare the device for recording.