Operating Instructions and Installation Instructions

TransVu Express

Network (green button)

Secondary Web Port If the default port setting for web serving has already been allocated, it

is possible to congure a second port number

i.e. the secondary web port can be set to 8000 if the default web port

(80) is blocked by the network or rewall.

Telem UDP Port Selection Select ‘Automatic’ to enable the unit to select a suitable port for

telemetry purposes.

Select ‘Default’ to use the default port settings (1025).

Select ‘User Dened’ to use settings entered in the ‘Telemetry Port’

option.

Telemetry Port Enter the port settings for telemetry data here. The default setting is

1025.

Note: This option will only be displayed when ‘User Dened’ is selected in the Telem UDP Port

Selection option.

Samba Workgroup Enter the Samba (SMB) Workgroup details.

Note: A unit reset is required to activate/update Samba (SMB) Workgroup details, refer to

Features -> System -> ‘SMB Server Support’ for more details.

Use Record Proles For Tx Select this option when units required Video Transmission prole

(rate/quality/resolution) is identical to that being recorded.