Operating Instructions and Installation Instructions

TransVu Express

Time and Date

This menu allows the time and date to be set on the unit. Required timezone information can also be

established and the unit time synchronised to that of the PC being used to view the webpages.

System Time The current system time and date is displayed.

Current Time Zone Displays the currently selected time zone settings.

Time Zone

Select the relevant timezone offset from the drop down menu

Reset (Red) When a change has been made to the unit’s Time Zone setting, it is

necessary to reset the unit before the change will take effect.

Date Format As default, the date is entered dd/mm/yy. It can also be displayed

as mm/dd/yy or yy/mm/dd.

Time Format As default, the time displayed is in 12 hour format. This can be

changed to 24 hour if required.

SNTP Server A Simple Network Time Protocol (SNTP) server allows external

devices to connect and set their current date and time settings to that

of the SNTP. If required, enter the SNTP server IP address here.

Set Time Enter a current time for the unit.

Set Date Enter a current date for the unit.

Set Time (Green) When current ti

me/date as been entered, select this button to i

mplement

changes.

PC Time Displays the system time of the PC being used to view the webpages.

Sync Time (Blue) Use this button to synchronise the time of the unit to that of the

PC being used to view the webpages.

Note: The PC Time and Sync Time options will only be available if viewing the menu via

the webpages.