Operating Instructions and Installation Instructions
AD Holdings ©2011
129
TransVu Express
Text Filter Select the text lter option from the drop down list. The options are:
Plain Text (default), RAW, EPSON, Laserjet, DM POS Receipt, DM
POS Journal, TVC-1066
Line length This identies the length of the lines that will be stored with
the image.
The default setting is 20 characters i.e. typically full screen.
Number Visible Lines To enable the text information to be viewed successfully, it is
necessary to establish how many lines of text will be visible
on screen.
Background Colour A black background box appears by default around the text. It is
possible to change the colour of this box. Select from the drop down
list.
Text Colour The colour of the displayed text can be changed. Select from the drop
down list.
Enable Keywords This enables or disables the Keyword feature, allowing the unit to
treat certain pre-programmed words received via the text stream as
event triggers. Refer to ‘Keywords’ for guidance on creating Keyword
triggers.
Keywords pulse extension This time period allows multiple instances of a word received within
a period of time to be treated as a single event (i.e. if a congured
Keyword is detected again within the rst Keyword’s pulse extension
period, the second (and following) occurrences of the word will be
ignored).
Reset (Red) Select to reset the unit.
Zone Act (Green) Select to open the Alarm->Zone Actions menu
Keywords (Yellow) Select to open the Features & Text->Keywords menu
Serial (Blue) Select to open the System->Serial Ports menu
Refresh (Purple) Refreshes the information on the current page