Operating Instructions and Installation Instructions
AD Holdings ©2011
123
TransVu Express
ANPR
The ANPR Setup menu allows an allocated ANPR Analytics license to be congured. The ANPR
software can be set to function most effectively at Barrier Control (vehicles travelling at less than
20mph) or Normal Trafc ow (vehicles travelling in excess of 20mph).
It is important to set the Region data correctly. The ANPR software will use this information to
interpret the target number plates as efciently as possible.
Camera Select the relevant camera channel. Only those camera channels
assigned an ANPR AnalyticsCapable license will be available.
Trafc Type
The camera can be congured for different trafc monitoring scenarios;
‘Barrier Controlled’ or ‘Normal’. In Barrier Controlled mode, vehicles are
expected to be travelling at a speed less than 20mph. Normal mode
is intended for use in free owing trafc scenarios were vehicles are
expected to be travelling in excess of 20mph.
Detected Timeout (ms) This is the delay between number plate detection and a barrier
opening to allow the vehicle to enter/exit.
Note: The time is entered in milliseconds (ms).
IMPORTANT: The Detected Timeout function is only relevant when ‘Barrier Control’ has been
selected in the Trafc Type option.