Operating Instructions and Installation Instructions

TransVu Express

System Settings

The menus under the System Settings heading allow the unit’s core settings to be viewed, changed

and the system software upgraded.

The System option displays details about the unit including the IP address, unit serial number, MAC

address and software version.

The Status page displays information about the unit’s operating condition, shows how long the unit

has been operating and the reason for the last reset. It also shows camera status and displays any

failed cameras.

The Language page allows the system language to be set. The language can also be changed for

the current session only.

The Time and Date page allows the unit time and date settings to be adjusted, including setting

the timezone.

The Serial Ports page allows each of the two serial ports to be individually congured for one of a

range of operations, including, debug, PPP and telemetry.

The Power Manager page allows the conguration of power saving procedures such as the timeout

limits for ignition off and low voltage level detected.

The GPS Settings page details information relating to the unit’s GPS (Global Positioning System).

The Audio page shows the settings available for each of the audio channels and allows conguration

of audio quality.

The Features page allows control of the different features that are available within the software

including Email reporting, webcam support and control of the display resolution.

The Maintain page allows the current conguration to be saved, and for previously saved settings to

be loaded. It also enables easy upgrade of the system software.

The PowerScript Mgmt page allows installed PowerScripts to be activated/deactivated on start-up.

The Database page allows the database to be reset, and can be used to limit the number of entries

held in it.

The Video Storage Page allows one of the units USB sockets to be used as an external storage

output. A high capacity USB device could then be connected and used to store recorded

video images.