Operating Instructions and Installation Instructions

105

TransVu Express

Web Cam

Any of the video inputs on the unit can be made available for transmission to a webserver via a

designated webcam server. These images can then be incorporated into a web page and accessed

via a standard web browser.

Note: This menu will only be displayed if ‘Webcam Support’ is selected in the

System Settings->Features menu.

Server URL This is the IP address, URL or Domain Name of the WEBCAM Server.

Images will be uploaded from the unit to this server at specied time

intervals.

Disable ICMP Discovery The unit will not attempt to ‘Ping’ the congured web server but will

begin immediate data transfer.

Root Directory This is the main/root directory on the webcam server where the image

directory will be located.

Image Directory This directory will be created when the initial image is uploaded to the

webcam server, it is the directory where all images will be saved on the

server.

Image Filename Prex This is an identier for images sent from the unit and will be stored as

a prex to the le name.

Username If it is necessary to use an authentication process to access the

webcam server, enter the relevant username here.

Password If it is necessary to use an authentication process to access the

webcam server, enter the relevant password here.

Update Interval This is the minimum update interval between each image transmitted

from the unit.