Operating Instructions and Installation Instructions

103

TransVu Express

Remote Reporting

This menu details the conguration requirements for the unit to report to a Remote Video Receiving

Centre (RVRC) following alarm activation.

Note: This menu will only be displayed if ‘Remote Reporting’ is selected in the

System Settings->Features menu.

Primary Hostname This is the IP address or URL of the initial host that the unit will

transmit an alarm message to.

Primary Dial Prole It is possible for the alarm message to be transmitted via the Ethernet

network.

Secondary Hostname If the unit is unable to contact the primary host, an alternative route

can be identied via a secondary host. If there is only one alarm

receiving IP address, you must enter the details in both the primary

and secondary connection settings.

Secondary Dial Prole It is possible to select a separate dial prole for the secondary host.

Public (NAT) Address This is the public IP (or domain name) for a unit connected to the

Internet via a NAT Router or Firewall. This eld should be left blank if

NAT is not used e.g. a private network.

Video Server Port This eld allows the RVRC to connect to the unit through a router that

is using port forwarding e.g. if the video server does not appear on port

80 (HTTP), to the external network. Enter the port number used for

forwarding here if required.

Alarm Server ref. ID This is the reference name/ID that will be presented to the RVRC

viewing application. It should therefore have some signicance to the

Operator.

Remote Alarm Reporting This must be enabled for the unit to automatically connect on alarm.