Instruction manual

17
4. To adjust panning limit, press the PRESET + 95 keys on the start or end field. Then use
the Joystick to go the desired direction. Press the PRESET + 95 keys to finish. The end
limit must be in an increasing direction. (Start < End).
5. When you press PRESET + 95 keys twice, the current position of the pan will be printed in
the highlighted column. With this feature, you can easily set the next start point as the
previous end point.
6. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the
program by pushing the Joystick to the right. Press PRESET + 96 to exit the program
without saving.
Pressing the PRESET + 91 key will delete programmed data. (Angles will be turned ====
immediately.)
3.10 Privacy Zone
Hide up to 8 unwanted views in a camera.
1. Press PRESET + 95 keys to display the main menu on the monitor. Select the Privacy
Zone option by pushing Joystick Up or Down and push to right to enter the detail menu.
2. Select the privacy zone number by pushing the Joystick up or down.
3. To enter the zone name, rotate the handle clockwise or counterclockwise. You can select
alphanumeric characters by rotating the handle. Move to the next character position by
pushing the Joystick to the right. To finish entering the title, push the Joystick down or
press the PRESET + 94 key.
4. To adjust the “marked” (privacy) area, press PRESET + 95 keys and then use the Joystick
(direction and zoom) until you get desired view. Press PRESET + 95 keys again, the right
column will be set to ON.
5. You can overwrite an existing zone. Use the Home key to delete the marked zone, or push
the Joystick to the right or left to turn the stored zone On or Off.
6. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the
program by pushing the Joystick to the right. Press PRESET + 96 to exit the program
without saving.
Note: Press PRESET + 91 keys to delete programmed privacy zone.
PRIVACY ZONE SETUP
NO TITLE METHOD
01 xxxxxxxxxxxxxxxx ON BLOCK
02 xxxxxxxxxxxxxxxx OFF V.OFF
03 xxxxxxxxxxxxxxxx NONE ====
04 xxxxxxxxxxxxxxxx NONE ====
05 xxxxxxxxxxxxxxxx NONE ====
06 xxxxxxxxxxxxxxxx NONE ====
07 xxxxxxxxxxxxxxxx NONE ====
08 xxxxxxxxxxxxxxxx NONE ====
SAVE AND EXIT(ESC TO CANCEL)