Instruction manual

1. Press Menu to display the main menu on the monitor. Select the Alarm option by pushing

the Joystick up or down and push to right to enter the detail menu.

2. Select the alarm input number by pushing the Joystick up or down and select the column

you wish to setup. Selected position will be highlighted.

3. Select the Preset, Status of Input (NC/NO/OFF), and Output (OUT1~4/OFF) by pushing the

Joystick to the right or to the left.

4. To increase or decrease the preset number or to change the status or output number, twist

the Joystick clockwise or counterclockwise. In case of preset, programmed preset number

will be scrolled.

5. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the

program by pushing the Joystick to the right. Press PRESET + 96 to exit the program

without saving.

3.9 Area Title

Enter a specific name on programmed angle between START and END. For the screen below,

when the camera points at an angle between 124.3° to 359.5°, ABC will be displayed on the

screen.

There are 16 programmable numbers. Pages can be scrolled through by pushing the Joystick

to the Left or Right on the first or last column of the menu. Pushing the Joystick to left on the

“NO” column of the menu to scroll to the previous page. Push the Joystick to right on the “END”

column to go to the next page.

1. Press PRESET + 95 to display the main menu on the monitor. Select the Area Title option

by pushing the Joystick up or down and push to right to enter the detail menu.

2. Select the area number by pushing the Joystick up or down. Select Start, End or number

column to be set by pushing the handle to the right or left. The selected column will be

highlighted.

3. To enter area title, select the number column and rotate the handle clockwise or

counterclockwise. You can select alphanumeric characters by rotating the handle. Move to

the next character by pushing the Joystick to the right. To finish entering the title, push the

Joystick down.

AREA TITLE SETUP

NO TITLE START END

01 ABC 124.3 359.5

02 xxxxxxxxxxxxxxxx ===== =====

03 xxxxxxxxxxxxxxxx ===== =====

04 xxxxxxxxxxxxxxxx ===== =====

05 xxxxxxxxxxxxxxxx ===== =====

06 xxxxxxxxxxxxxxxx ===== =====

07 xxxxxxxxxxxxxxxx ===== =====

08 xxxxxxxxxxxxxxxx ===== =====

SAVE AND EXIT(ESC TO CANCEL)

HOLD DOWN CTRL KEY TO MOVE

PAINNING AND SET AREA ANGLE.