Instruction manual

5. After aiming the camera (view direction and lens control), press PRESET + 95 again.

6. Then twist the Joystick handle or press ZOOM IN or ZOOM OUT Key to store the selected

view. The position number will be displayed and the user will be prompted to enter a preset

title.

7. Enter the title for the preset position using the Joystick. (Rotate handle clockwise and

counterclockwise or press ZOOM IN or ZOOM OUT Key to scroll through the alphanumeric

characters, push the handle to right or left to select next or previous digit.)

8. When you are finished entering the title, push the Joystick downward. Set the focus by

pushing the Joystick to the right or left. Set the IRIS value in the same manner as the focus.

9. Move to the DWELL setting by pushing the Joystick down. Twist the Joystick clockwise or

counterclockwise to increase or decrease dwell time of the preset position.

10. Push the Joystick downward then the blank preset position changes *.

11. Repeat steps 2 through 10 for each additional preset position.

To select the next page of presets, scroll the page by pushing the Joystick to the Left on the

first and last columns of the menu. (In using the KBS3 keyboard with the PELCO-P protocol, you

can call the preset 1-32, 35-59.)

12. To edit the title of a stored preset, use the Joystick to position the cursor on the desired

preset position (*). Press the PRESET + 93key to recall the stored preset. Twist the zoom

handle clockwise to enter the preset title field. Preset titles are useful with short cut preset

programming.

13. Select Save and Exit by pushing the Joystick to the right. Press PRESET + 96 to exit the

Preset menu without saving.

NOTE: Press PRESET + 91 at programmed position to delete a programmed preset view.

NOTE: In the normal display mode, an alternate method is to press the PRESET button two times

quickly in the DS2 model.

3.5 Shortcut of Preset Program

After selecting a view to be stored (direction of the camera, zoom and focus), press and hold

PRESET until the pop-up window below displays in DS2 model.

Press number you want up to

99.The old saved preset number is overwritten.

NOTE: Camera 10 is number 0 and you should press 0 and 1 to enter 1.

NOTE: In case of the KBS3 keyboard, you can call the preset 1-32, 35-59 and the other preset

numbers can be used in the tour, the alarm and the home function.

Save preset

Enter PRESET number

1-99