Operating instructions
Dedicated Micros ©2010
84
SD Advanced
Alarm Settings
The Alarm Settings menus allow conguration of the unit’s alarm functionality. Individual alarm inputs
and alarm zones can be congured. Global relays can be activated and the Activity grid set up.
Refer to the individual menus for further details.
The Alarm Input page allows conguration of alarm channels. Up to 19 alarm channels are available.
The Zone Input page enables the conguration of alarm zones. Up to 32 separate alarm zones can
be created.
The Zone Actions page enables actions such as Go to Preset to be allocated to alarm zones. Zones
can also be associated with a specic camera. On receipt of an alarm, images from the associated
(primary) camera will automatically be displayed in the Viewer menu.
The Masked Camera Detection page allows cameras to be enabled for ‘masked’ detection based on
a threshold contact value and dwell time.
The VMD/Activity Response page enables conguration of responses following an VMD/Activity
Detection trigger.
The Activity Setup page allowed activation and conguration of the Activity feature on all video
inputs. The Activity feature enables cameras to automatically detect any movement/changes within
the video scene. This can trigger a number of operations such as FTP alarm notication or an
increase in the recording rate.
The VMD Conguration page enables the unit’s VMD (Video Motion Detection) to be set-up. VMD
allows a camera to automatically detect if there is any movement/changes within specic areas of
the video scene.
The Global Actions page allows the two onboard relay connections and global relay settings to be
congured.