Operating instructions

Dedicated Micros ©2010
69
SD Advanced
Prole Record
It is possible to set the unit recording conguration based on specic priorities. The MultiMode
recording feature offers the ability to set different recording rates, resolutions and compression
formats across unset, set and override modes for each individual camera. By varying the quality, bit
rate and le size of recorded images, the MultiMode function enables the recording capabilities of
the unit to be greatly increased. The Prole record menu can be accessed in a Simple format or in
Advanced mode. The Advanced mode offering greater opportunities to dynamically edit individual
cameras recording capabilities.
What is Turbo mode?
Turbo mode allows video images from any analogue camera or 3rd Party IP recoded camera to
be recorded and streamed at the maximum possible rate without the need to congure individual
settings. Turbo mode must be set Globally and will result in MPEG record rates of 12.5pps@4CIF
and 25pps@2CIF/CIF/QCIF.
Note: When selected, there will be only ONE congurable Record Prole across ALL cameras.
The unit then matches the live transmission rate to the congured record rate. This enables
a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’ Live Transmission proles are
available for conguration (Network Settings->Live Transmissions). Low and Medium
transmission settings are congurable to allow video streaming over low bandwith IP
connections and are limited to CIF for this purpose.