Operating instructions

Dedicated Micros ©2010
43
SD Advanced
Video
Detected Video Standard The unit automatically detects the video standard being used i.e.
PAL/NTSC.
Deinterlace mask When Enabled, this option will improve the appearance of moving
objects by applying a deinterlace mask that minimises the comb
effect that can be visible when recording high motion scenes in
4CIF mode. It is recommended that this option be enabled when
recording in 4CIF mode.
Comb Filter Enable this option to activate the Comb Filter function. Comb
Filter can help improve the ne details of a video signal image by
ltering the luminance and chrominance separation process.
Disable Transcoding Select to disable the unit’s transcoding capabilities. In normal
circumstances this should always remain enabled, however it can
be useful to disable the feature when conducting maintenance.
Partial Full Duplex Select to enable the Partial Full Duplex option. This feature is only
relevant when viewing in mulitiscreen mode above quad. When
selected (and viewing in MPEG mode/mulitscreen above quad);
only the recorded I frames are displayed and not the P
frame data.