Operating instructions
Dedicated Micros ©2010
32
SD Advanced
Turbo Mode Proles Select to open the Turbo Mode Proles menu. This menu provides
detailed information on the camera record settings when the unit
is congured to operate in Turbo Mode. Note that when the unit
is not operating in Turbo Mode, no information will be displayed.
Refer to the Prole Record menu (Record Settings->Prole
Record) for further information on the Turbo Mode function.
Codec Loading Select to open the Codec Loading menu. This menu details
the demands placed on each codec in the form of CIF Usage
(per sec) and Bitrate Usage (kbps). The ‘Maximum bitrate per
codec’ and the ‘Maximum CIFS per codec’ sections highlight
the maximum loading capabilities for each codec. When these
capabilities are breached, the attributing record prole will be
highlighted ‘Red’. Should the codec’s capabilities be breached
while the unit is operating in Turbo Mode, the entire codec’s
column will be highlighted ‘Red’ (as there is only one record prole
in Turbo Mode).
IMPORTANT: The ‘Status’ information bar will provide valuable information on whether the
unit should be operating in Turbo Mode or not.
Camcong Details Select to open the Camera Attributes menu. This menu provides
detailed information on the type of camera i.e. analog or IP and for
IP cameras, the supported resolution and capabilities.
Capabilities Select to open the Capabilities menu. This menu details the
function capabilities of your unit.
UI Information Select to open the UI (User Interface) menu. This menu details
basic information regarding your unit. The java applet path is also
shown. The default location will always be the applet installed on
the unit. If accessing multiple units via a remote connection, all
can be assigned the same Viewer applet. This will lessen the load
time required when accessing different DVRs/Servers. Refer to
the Viewer Defaults menu for further guidance (Display Settings-
>Viewer Defaults).
Prole Record Tables Select to open the Prole Record Tables menu. This menu
thoroughly details the precongured recording settings.