Operating instructions

SD Advanced

Step 9 Connecting DM Oracle, 2060 & 2040 Domes

A DM Oracle, 2040 or 2060 Dome can be connected via either co-axial telemetry or RS485 twisted

pair. If using co-axial the address switches should be set as:

Blue switch - F

Yellow switch - D

If the dome is being connected using RS485, the dome address should be set according to the

camera number of the SD Advanced.

Pin connections for RS485 connection to a Dennard dome on serial port 3/4 are:

Dome Cable SD Advanced Serial Connector

Yellow 1 TX+

Green 9 TX-

Step 10 Connecting Power

The SD Advanced has an internal power supply unit. Connect the mains lead to the unit and then

to the wall socket, or to a fused spur connection. To be compliant with wiring regulations in some

countries, an Alarm/Security device should be connected to a fused spur and not a wall outlet socket

(check local regulations before installation).