Operating instructions
Dedicated Micros ©2010
101
SD Advanced
Global Actions
This menu allows conguration of the default relay actions supported on the unit.
The unit supports four onboard relay connect
ions and global relay settings. This global relay can be
trigge
red under specic conditions i.e. on receipt of any alarm or notication of Activity
Detection
.
Image Protection Period Select a time period (in days) that images associated with an
alarm will be protected from deletion.
Alarm Display Mode When a relay has been triggered, the primary camera associated
with that relay can immediately be displayed on the local monitor.
Select ‘Jump To Primary Camera’ from the drop down list to
activate this function.
Revert Display Mode Enable this setting to make the unit return to the view displayed
before the alarm activation once the alarm has ended.
Alarm Display Alert Enable this setting to display an alarm text alert in the colour
specied in ‘Alarm Colour’ in the Zone Actions Menu.
Normally Select whether the normal state of the relay contact should be
Open or Closed for each of the four local relays.
On Select to enable detection of the accompanying condition. Options
available are; VMD/Activity, Camera Fail, System Set, Dial Out,
System Override, Camera Masked and Is Recording,