User guide

Dedicated Micros ©2006
42
NetVu ObserVer
Appendix B
Selection of User Star Commands
Command
*1xx (where xx is the range)
Range 01 - 02
Function Select Monitor 1 or 2
BBV Telemetry Equivalencies NOT IMPLEMENTABLE
Pelco Equivalencies NOT IMPLEMENTABLE
Command
*2xx (where xx is the range)
Range 01 - 16
Function Select Camera 1 to 16
BBV Telemetry Equivalencies Select Camera to apply telemetry information
Pelco Equivalencies Select Camera to apply telemetry information
Command
*4nx (where n is the function, x enables or disables)
Range x=5 for on, x=0 for off
Function Auxilliary Relay Control (values for n : 1=wash ; 2=wipe ;
3=lamps ; 4=autopan)
BBV Telemetry Equivalencies Auxiliary Relay Control (values for n : 1=wipe ; 2=lamps ;
3=wash ; 4=autopan)
Pelco Equivalencies n = 1 to 8, dependant on settings retained in the head
Command
*7xx (where xx is the preset position)
Range Dependant on Dome
Function Store preset xx
BBV Telemetry Equivalencies Stores current position as preset 01-15 on the selected head
Pelco Equivalencies Stores current position as preset 01-31 on the selected head
Command
*9xx (where xx is the preset position)
Range Dependant on Dome
Function Go to preset xx
BBV Telemetry Equivalencies Go to preset 00-15 on the selected head (00 is park position)
Pelco Equivalencies Go to preset 00-33 on the selected head (32 = 180° pan
rotation, 33 = Zero ref point)
Command
*854xxx (where xxx is the setting)
Range 000-001
Function 000 = Patrol mode off, 001 = Patrol mode on
BBV Telemetry Equivalencies Implemented
Pelco Equivalencies Not Implemented
Command
858xxx (where xxx is the setting)
Range 000-001
Function 000 = Turn Auto Pan off, 001 = Turn Auto Pan on
BBV Telemetry Equivalencies Selects Autopan in frame 3, turned off my left or right
movement, or *858000
Pelco Equivalencies Not Implemented